KitchenAid Appliance Repair in Los Angeles

KitchenAid built-in fridge running warm? Dishwasher leaving everything wet? We fix those, plus KitchenAid wall ovens, ranges and cooktops, all over LA. Panel-ready and built-in stuff too, the kind nobody wants to rip out. It's a Whirlpool brand underneath, which helps a lot when it comes to finding parts.

$65 diagnostic applied toward an approved repair • Clear estimate before work begins • 183-day parts and labor warranty.

Call before 11 and we can often come the same day. Fans, igniters, sensors, pumps and ice maker parts for KitchenAid usually aren't hard to get. Built-in and commercial-style parts sometimes take a few days. We'll tell you which before you say yes.

With KitchenAid, the trouble tends to show up in two places: fridges and dishwashers. On a built-in fridge we check airflow before anything else. Dust on the condenser, a fan that's getting lazy, and suddenly the whole box is running warm. KitchenAid's own advice is a condenser cleaning every six months if you've got pets or a dusty house.

A dishwasher that won't dry is usually fine, honestly. Rinse aid's low, the tap water's lukewarm, or someone keeps hitting the quick cycle. But if the tub's not even warm after a heated dry, now we're talking heater or drying system, and we'll test it. Ovens are simpler. They throw a code, and on most KitchenAid wall ovens F3 means the temp sensor circuit.

• We rule out the easy stuff first: rinse aid, filters, a dusty condenser, a tripped breaker
• You talk to the technician doing the work
• $65 diagnostic, applied toward the repair if you go ahead
• Written estimate before any work starts
• Parts matched to your full model number
• Shoe covers and floor protection
• Licensed in California, License A 50129
• 183-day warranty on parts and labor for completed repairs

Have the model number handy. On KitchenAid fridges it's usually on the side wall inside the fresh-food section. On dishwashers, check the edge of the door or the tub. On wall ovens, look around the frame with the door open.

Built-ins are where fixing a KitchenAid really pays off. The new one has to match the hole in your cabinets, maybe the panels too, and that gets pricey quick. Fan, board, ice maker, sensor, igniter: fix it.

Freestanding stuff, it depends. Sealed system dies on an older freestanding fridge, or a dishwasher tub cracks? Might not be worth it. We'll give you a straight answer after the diagnostic.

No. We are an independent repair company and are not affiliated with or authorized by KitchenAid or Whirlpool Corporation. If your appliance is still under the KitchenAid warranty, contact KitchenAid first.

Check airflow first. Dust on the condenser or a slow fan will warm up the whole fridge, and a frosted-over evaporator chokes off the fresh-food side. KitchenAid says clean the condenser every six months if there are pets or lots of dust around. Didn't help? Then we test the fans, the defrost parts and the control.

Usually rinse aid, a quick or eco cycle, or lukewarm water coming in. Turn the rinse aid up a notch, pick heated dry, and run the kitchen tap till it's hot before you start. Tub still cool at the end of a heated dry? Then the heater or the drying system may be out.

$65. If you approve the repair, it's applied toward the total. You get a written estimate before any work begins.

Yes. We work on KitchenAid commercial-style gas and dual fuel ranges, including burners, igniters, oven sensors and convection fans.

Same-day diagnostics are often possible if you call before 11 AM. Simple fixes can sometimes be done on the first visit. Parts that aren't available locally are ordered after the diagnostic, and we schedule the repair when they arrive.