LG Dishwasher Won't Turn On or Respond: How to Reset It and What to Check

When an LG dishwasher won't turn on or ignores the buttons, the cause is usually simple: no power at the outlet, Control Lock turned on, or a door that wasn't closed in time after pressing Start. A power reset clears a frozen control in a few minutes. If the panel stays dark with power present, or lights up but doesn't respond, the control board, keypad or door switch is the likely problem.

Start with what the display shows

What you seeLikely causeWhat to do
Display completely darkNo power reaching the dishwasherCheck the breaker, wall switch and plug
CL on the display, buttons do nothingControl Lock is onHold the unlock buttons for 3 seconds
"--" right after pressing StartCycle was cancelled and is drainingWait 2 to 3 minutes, then start again
Lights up, takes a cycle, but won't runDoor not latched, or closed too latePress Start, then close the door within 4 seconds
Shuts off a few minutes into a cycleStart was held too long, which cancelsPress Start briefly
Panel lit, no CL, buttons deadWet panel, or a failed keypad or boardDry the panel, reset, then call for service

Check the power first

  • Breaker. Find the dishwasher breaker in the panel and switch it fully off, then on. LG notes that running other high-power appliances at the same time, like an induction range or a microwave, can trip it. If the breaker trips again as soon as the dishwasher starts, stop there and have it checked. That points to a short in the dishwasher or its wiring.
  • Wall switch. Many Los Angeles kitchens have a wall switch next to the disposal switch that actually powers the dishwasher. Flip it.
  • Plug and GFCI. If the dishwasher plugs in under the sink, make sure the plug is pushed all the way in. If that outlet has Test and Reset buttons, press Reset.
  • Hard-wired units. Some dishwashers are wired straight into a junction box behind the kick plate. Leave that box to an electrician or a technician.

How to reset an LG dishwasher

LG dishwashers don't have a reset button. A reset means cutting the power so the control board restarts.

  1. Press Power to turn the dishwasher off, if it responds.
  2. Switch off its breaker, or unplug it, and wait about 5 minutes.
  3. Turn the power back on and press Power.
  4. Choose a cycle, press Start, and close the door within 4 seconds.

A reset clears a frozen panel or a glitch after a power outage. It doesn't repair a fault. If the same error code comes back right away, look it up in our LG dishwasher error codes guide instead of resetting again. Also note that Control Lock survives a reset, so if the buttons are still dead afterward, check for CL.

Buttons not responding: Control Lock (CL)

CL on the display means Control Lock (Child Lock) is on. Nothing is broken. All the cycle and option buttons are blocked so a child can't change the settings.

  • To unlock, turn the dishwasher on, then press and hold the two buttons marked with the lock symbol for 3 seconds. On many LG models that is Half Load and Energy Saver. Some models have a single Child Lock button that you hold for 3 seconds.
  • It stays on after the cycle ends and after you turn the dishwasher off. That is why the panel can look dead the next morning.
  • Still no response after unlocking? LG suggests wiping the panel with a soft cloth, since moisture or residue on a touch panel can block the buttons.

If the buttons light up but you don't hear a chime, the button sound may simply be turned off. The button pair that turns it back on differs by model, so check the owner's manual.

It powers on but won't start

  • The door isn't latched. Close it firmly until it clicks. A rack that sticks out or a tall pan handle can stop the latch.
  • The door was closed too late. On many LG models you press Start and then close the door within 4 seconds. If you wait longer, the dishwasher beeps and doesn't run.
  • The door was opened mid-cycle. After you open the door during a cycle, press Start within 4 minutes. Otherwise the dishwasher turns off and loses the settings.

Why an LG dishwasher won't turn off, or turns off by itself

  • You held Start. A short press starts the cycle. Holding Start for about 3 seconds cancels it. The dishwasher then drains for 2 to 3 minutes, shows "--" and turns itself off. LG lists this as normal behavior, not a fault.
  • A cycle is still running. If time remaining is still on the display, the wash or drying stage isn't over. Wait it out, or cancel by holding Start.
  • The panel froze. If the dishwasher ignores the Power button, cut the power at the breaker for a few minutes, as in the reset steps above.
  • It keeps happening. A dishwasher that regularly won't turn off, or switches off at random, usually has a control board or keypad fault.

When it's the control board, keypad or door switch

Call for service if:

  • The outlet or circuit has power, but the display stays dark. A blown fuse on the control board, a loose wire or a failed door switch can cause this.
  • The panel lights up, Control Lock is off, and the buttons still don't work. LG says this needs inspection.
  • The breaker trips every time the dishwasher starts.
  • The display flickers, shows random symbols, or the dishwasher turns on by itself.

We test the power at the outlet or junction box, the door switch, the control board and the keypad connection, and tell you which part failed before any work starts. The diagnostic visit is $65, credited toward the repair if you go ahead. Repairs are covered for 183 days on parts and labor.

In Los Angeles, book LG dishwasher repair online, or see dishwasher repair for other brands.

FAQ

How do I reset my LG dishwasher?

Turn it off, switch off its breaker or unplug it for about 5 minutes, then turn the power back on. LG dishwashers have no reset button. If the same error code returns right after a reset, the dishwasher needs a repair, not another reset.

Why is my LG dishwasher touch panel not working?

Check the display for CL first. That is Control Lock, and you turn it off by holding the lock buttons, often Half Load and Energy Saver, for 3 seconds. If there's no CL, wipe the panel dry and do a power reset. A panel that lights up but still doesn't respond needs service.

Why is my LG dishwasher not turning off?

A cycle or drying stage may still be running, so check the time remaining. To stop it, hold Start for 3 seconds: it drains for 2 to 3 minutes and turns off. If the panel won't respond at all, turn off the breaker for a few minutes.

Why does my LG dishwasher turn off a few minutes after I start it?

Holding the Start button too long cancels the cycle. The dishwasher drains and turns itself off. Press Start briefly instead. If you opened the door mid-cycle, press Start again within 4 minutes, or it turns off.

Why won't my LG dishwasher turn on after a power outage?

Turn its breaker off for a few minutes and back on, then press Power. If the display stays dark and the outlet has power, the control board may have been damaged and should be checked.

Can I reset my LG dishwasher without unplugging it?

LG dishwashers have no reset button. To stop a cycle that seems stuck, press and hold Start for about 3 seconds. LG says this cancels the cycle, drains the water for 2 to 3 minutes and then turns the dishwasher off. That clears the cycle but not a power or control fault. For a full reset you still need to cut power at the breaker or plug for a few minutes.

Why does my LG dishwasher show dashes and ignore the buttons after I press Start?

The dashes mean it is draining. LG shows them while a cycle is being cancelled, for example after Start was held for 3 seconds. Wait until the water drains and the dishwasher turns itself off, then start a new cycle. If the dashes stay for much longer than a few minutes, cut power at the breaker and try again.

Give us a call if your LG dishwasher still won't turn on after a reset, the panel lights up but ignores the buttons, or the breaker trips when it starts. Call (213) 761-5757, the diagnostic is $65 and it comes off the bill if you go ahead.