We set it in the opening, connect the water line and drain, secure it to the counter, and run a full cycle to check for leaks.
We hook up the hot and cold hoses and the drain, remove the shipping bolts on front loaders, and level the machine so it doesn't walk.
We fit the power cord to match your outlet, connect the vent, and check that air moves freely through it.
We connect it to your gas shutoff with a new flexible connector, test every fitting for leaks, and connect the vent.
We mount the hood, connect it to your existing duct and power, and check the fan and lights at every speed.
We connect it to your gas line with a new connector, install the anti-tip bracket, and light every burner and the oven.
We fit a new oven into your existing cutout, connect it to the circuit that's already there, and test bake and broil.
Whether it runs on gas, electricity, or induction, we drop it into the existing cutout, connect gas or power, and test every burner or zone.
Replacement or a new install under the sink, with your unit or ours, plus the dishwasher drain connection.
These are typical labor prices in Los Angeles for hooking a new appliance up to connections you already have. You get the exact price when we confirm the visit, before any work starts.
The price covers disconnecting the old unit, setting the new one in place, connecting it, leveling it, and testing it. If the job needs a part that isn't in the box, like a gas connector, a dryer cord, or a water hose, we tell you the price before we start. Repair prices are in our appliance repair cost guide.
We hook appliances up to what's already in your home. These jobs come first and need a different trade:
We don't deliver appliances. Have the store deliver it, then book us to hook it up once it's in your home.
We connect to the outlet or circuit that's already there. A new outlet, a 240-volt line, or a bigger breaker is a job for a licensed electrician.
We connect to an existing gas shutoff. Adding a gas line, moving one, or converting a kitchen from electric to gas needs a licensed plumber and a permit.
We fit the new unit into the opening you have. If the new appliance needs a bigger cutout, a cabinet maker or countertop installer does that part first.
We connect a range hood or dryer to a duct that's already in place. Running a new duct through a wall or the roof is a separate job.
Five minutes of prep makes the visit faster and avoids a second trip:
We never reuse an old gas connector. Every gas hookup gets a new flexible connector, and we test each fitting with leak detection solution before we light anything. Gas ranges get an anti-tip bracket, so the range can't tip forward if someone leans on the open oven door.
A gas dryer still needs a regular 120-volt outlet to run the drum and the controls. A gas stove needs one too, for the igniters, clock, and oven light.
Front-load washers ship with bolts in the back that hold the drum still. If you run the washer with them in, it shakes hard enough to damage itself, so we take them out and keep them for you in case you move. We also level the machine on all four feet.
Most electric dryers come without a power cord. The cord has to match your outlet: 3-prong in older homes and 4-prong in newer ones. For the vent, we use metal duct, not plastic or thin foil, since lint builds up faster in those. If your old vent is packed with lint, our dryer vent cleaning service clears it.
A dishwasher drain needs a high loop or an air gap, so dirty sink water can't flow back into the tub. If it drains into a disposal, we check that the knockout plug is gone. A range hood works best vented outside, so we connect it to your existing duct and seal the joints. If there's no duct, a recirculating hood with a charcoal filter is an option.
Wall ovens and cooktops have to fit the cutout you have. Check the cutout size in the manual before you buy. Replacing an older unit and not sure it's worth it? Our guide on whether to repair or replace an appliance can help.
Labor for most hookups runs $100 to $420, depending on the appliance. A washer or electric dryer is at the low end. A chimney or island range hood is at the high end. You get the exact price before any work starts.
No. Have the store deliver the appliance, then book us for the hookup. We connect it to the water, drain, gas, power, or vent that's already in your home.
No. We only connect to what's already there. A new outlet or circuit needs a licensed electrician, and a new gas line needs a licensed plumber. Once that's in, we can install the appliance.
Only if there's already a gas shutoff valve at that spot and a regular 120-volt outlet for the drum and controls. If there's no gas line, a plumber has to run one first.
Most electric dryers don't. The cord has to match your outlet, either 3-prong or 4-prong. Tell us when you book, and we'll make sure the right cord is on hand.
Yes, we install any brand and model, as long as it fits the space and the connections you already have.
No. We disconnect the old unit and leave it with you. Many stores offer to haul away the old one when they deliver the new one.
No. Our 183-day warranty covers repairs, and an installation isn't a repair. A new appliance comes with its maker's warranty.
Most hookups take one to two hours. A wall oven, a chimney hood, or a job with old parts to remove can take longer.
We test it before we leave. If it shows a fault later, call us. The maker's warranty usually covers a new unit, and our technicians repair all major brands.
Call (213) 761-5757 or book online any time. Visits run 8 AM to 8 PM, seven days a week, and if you call before 11 AM, there's a good chance of a same-day visit. Licensed and insured, California License A 50129.