Miele appliance repair in your Los Angeles home: dishwashers, washers, dryers, refrigerators, ovens, cooktops and other built-in Miele appliances. A local technician tests the appliance, finds the cause and gives you one price before any work starts. The $65 diagnostic is credited to the repair, and every repair has a 183-day parts and labor warranty.
We're an independent repair company, not a Miele authorized service center. Miele covers its household appliances for 2 years from purchase on parts and labor, and the sealed system of a refrigerator or freezer for 5 years on parts and labor, then 5 more years on parts. If your appliance may still be covered by Miele or by a Miele extended warranty, contact Miele first, because Miele's terms exclude unauthorized repairs.
Miele appliances combine detailed electronics, precise mechanics and model-specific parts. The same symptom or error code can have more than one cause, so we test the parts involved before we recommend replacing anything.
Before any work, we inspect the appliance, find the likely cause, explain your options and give you a clear estimate. We work in houses, apartments, condos, rental properties and professionally managed homes across Los Angeles, and we take care around custom cabinetry, panels and flooring.
Dishwashers get the most Miele repair searches, followed by washers, dryers, ovens and refrigerators. Below are the most common codes and problems, what Miele tells owners to check first, and when it needs a technician. Codes and steps can differ by model, so check your manual too.
| Code | What it means | What you can check |
|---|---|---|
| F11 | Water isn't draining and stays in the tub | Unplug, take out the filter combination, bail out the water, check that the drain pump cover (or the non-return valve on older models) is seated and that the pump impeller turns freely. Broken glass is a common cause. |
| F12, F13 | Water inlet is blocked or restricted | Make sure the water tap is fully open, straighten the inlet hose and clean the inlet filter. Miele says the flow pressure must be at least 7.25 psi. |
| F14 | Circulation pump stuck, often after weeks without use, or a water level fault | Miele suggests about 1 liter of hot water with a few drops of rinse aid in the tub, repeated 2 or 3 times. If it comes back, it needs service. |
| F24 | Heating relay fault | Miele lists this as a fault you can't fix yourself. Book a diagnostic. |
| F70 | The Waterproof system has detected water and stopped the program | Turn off the water supply, switch the dishwasher off and unplug it. It needs service to find the leak. |
If the code comes back after these steps, we test the drain pump, the non-return valve, the circulation pump, the heater and the inlet valve, and look for the leak behind an F70.
Common washer problems are drain and spin faults, door lock problems and leaks around the door seal. Codes, W1 models and the steps to try first are on our Miele washer repair page. A common dryer complaint is long drying times. Miele's first checks are the lint filters, the plinth filter at the bottom (refit it clean and not dripping wet) and the heat exchanger fins. A warm room, a blocked air grille, an overloaded drum or laundry spun too slowly in the washer also make cycles longer.
If a Miele refrigerator isn't cooling, first check the power, the breaker and the zone settings, and make sure Demo mode is off, because it turns cooling off. For little or no ice, Miele lists an ice maker that is switched off, an ice drawer that isn't seated, a freezer set too warm, doors opened too often, and a closed, kinked or clogged water supply. A new ice maker can take up to 24 hours to start. If those are fine, we test the fans, defrost system, water valve and controls.
For an oven that won't heat, F codes, a door that won't unlock after self-clean and steam oven faults, see Miele oven repair. For induction zones that won't turn on, error codes and gas burners that won't light, see Miele cooktop repair.
Send us the full model and serial number when you book, so we can check parts before the visit. Miele puts the data plate along the right edge of the door on dishwashers, above the door glass with the door open on washers, inside the door on dryers, on the front frame with the door open on ovens, inside the cabinet on refrigerators and on the underside of cooktops.
The diagnostic visit is $65, and it is credited to the repair if you go ahead. The final price depends on the appliance, the model and the part: a drain pump, filter, sensor or door part costs far less than a control board or a sealed system repair. After testing, the technician gives you one price for parts and labor before any work starts, and if you decline, you pay only the $65.
Ours is $65, credited to the repair. For comparison, Miele's own repair page lists a $160 trip fee for out-of-warranty service and labor at $185 an hour in California (checked November 2026). Miele's prices can change, so check with Miele for a current quote.
No. Appliance Insight is an independent repair company and is not affiliated with or endorsed by Miele. We diagnose and repair Miele appliances that are out of Miele's warranty, order parts by your model and serial number, and cover each repair for 183 days on parts and labor.
Miele covers its household appliances for 2 years from purchase on parts and labor. On refrigerators and freezers the sealed system is covered for 5 years on parts and labor and 5 more years on parts. Miele also sells an extended warranty. Miele's terms exclude unauthorized repairs and non-genuine parts, so while your appliance is covered, contact Miele first.
Usually, yes. Miele says it keeps original spare parts in stock for at least 15 years after a model series ends production. Availability still depends on the exact model, so we confirm the part by model and serial number before we order it.
Miele says its G 5000 and G 7000 dishwashers are tested for the equivalent of 20 years of use, about 5,600 cycles. Real life depends on how often the appliance runs, water hardness, installation and maintenance. With parts available for years after production ends, many Miele appliances can be repaired long after the warranty is over.
Often it is, because of the build quality and the cost of a new built-in Miele. It depends on the age, the overall condition, past repairs, parts availability and the repair price. After the diagnostic we tell you the price and whether we think the repair makes sense.
Dishwashers that don't drain (F11) or don't fill (F12, F13), washers that don't drain or spin or won't unlock the door, dryers that take too long, refrigerators that don't cool or don't make ice, ovens that don't heat and cooktop zones that don't turn on.
F11 is a drain fault: water is left in the tub. Unplug the dishwasher, take out the filter combination, bail out the water and check that the drain pump cover or non-return valve is seated and the pump impeller turns freely. Broken glass is a common cause. If F11 comes back, the drain pump or the valve needs service.
Yes. Because the meaning and cause can vary by model, send us the full model number and the code when you book. Common dishwasher codes are explained above, and washer, oven and cooktop codes are on our Miele washer, oven and cooktop repair pages.
On dishwashers it's along the right edge of the door, on washers above the door glass with the door open, on dryers inside the door, on ovens on the front frame with the door open, on refrigerators inside the cabinet and on cooktops on the underside.
Same-day diagnostics may be available depending on the schedule, location, appliance and parts. Call before 11 AM for the best chance of a same-day visit. If a model-specific part has to be ordered, the repair needs a second visit.
Yes. We repair Miele appliances in Beverly Hills, Brentwood, Westwood, Santa Monica, Century City, Pacific Palisades, Marina del Rey, Venice and Culver City, and across Los Angeles, the Valley and Pasadena. The full list is below.
We repair many residential Miele dishwashers, washers, dryers, refrigerators, freezers, ovens, ranges, cooktops and built-in appliances. Availability depends on the model, age, installation and parts, so send us the model number to confirm.