Gas: clicks, no flame. Lift the burner cap and look. Grease in the ports, or a cap sitting cockeyed, will do it. Cap looks fine? Then we're looking at the spark electrode, the spark module or a switch.
Gas: keeps clicking even with the flame lit. We see this a lot on Wolf, Thermador and other pro tops with auto-reignition. The reignition system thinks the flame went out. Usually that's a dirty electrode, or the outlet behind the cooktop has reversed polarity or a bad ground, so the module can't "see" the flame.
Gas: flame's yellow, lazy or lopsided. Clogged ports or a cap that's sitting off center. A lazy yellow flame that leaves soot on your pans needs a look.
Radiant glass: zone won't heat, or stays on high. Usually the element itself, its limiter, or the infinite switch behind the knob. On touch-control tops it can be a relay on the board.
Hot-surface light stays on forever. Blame a stuck limiter or indicator switch. It's more than an annoyance, because now the light can't warn you when the glass really is hot.
Cracked glass. Don't cook on a cracked zone, period. The whole glass top gets replaced, and we'll find out if the part is still made for your model before you spend anything.
Induction: zone won't start, or the pan symbol blinks. First, the magnet test. If a fridge magnet doesn't stick firmly to the bottom of the pan, induction won't heat it. Pan's fine? Then it's often the power board, a coil, or the cooling fan.
Induction quits in the middle of cooking. Most of the time that's heat. A small fan under the glass keeps the electronics cool, and once it's packed with dust (or just dead), the cooktop shuts down to save the board.
If your downdraft vent has stopped pulling smoke, that's covered on our
range hood repair page, and if you've got a full range rather than a cooktop, head over to
range repair.